IMC Makine

  • +90 216 606 11 21
  • info@imcmakine.com
  • Pendik / İSTANBUL

4 Cavity Automatic Bottled Water Making Machine

Ürün Detayları

Models
Turbo-4L
Theoretical Capacity
5000-6000 BPH
Mold Cavities
4
Neck Size
18-38 mm
Max. Volume
2000 ml
Advantages
1.Using touch screen, easy to operate, save space.
2.Mold fixed by drawer design, mold changeover can be easily done in half hour.

Advantages:
1. The machine adopts human-computer interface to control the whole working procedures, auto-loading, auto blowing, auto dropping. Action cylinders are all assembled with magnetic induction switches.Connect with PLC to control every step and test every cylinder. Next action will continue after the former step done, If former step is not finished, alarm automatically and do not work. PLC displays problem position.

2. Conveying preforms automatically with conveyor.Fast speed, accurate position, smooth action.

3. According to special demand, adopt cross double crank pressed clamping, with strong clamping force. Mould open stroke can be adjustable according to the bottle size to save the time.

4. Far infrared heater lamps have strong penetrations , preforms are heated uniformly while rotating, PLC or electronic pressure adjustor controls each group of temperature separately.

5. Particular pre-heater design makes preform close while heating. Change space, shorten heating tunnel and reduce energy consumption according to the bottle size while blowing.

6. The air supply system consists of slight blow, high pressure blow, low pressure actions, to supply enough air for different products.

7. Special recycling installation for high pressure air reduce the energy consumption.

8. Operation consists of manual and automatic procedure, manual operation for assembly and test, automatic operation for production.

9. Production workmanship process is fully automatic to make best quality and pollution-free. it holds less investment, high efficiency, easy operation, simple repair, safety etc.