Single Screw Pet Plastic Bottles Injection Molding Machine
Ürün Detayları
| INJECTION | LOG160 PET | LOG210 PET | LOG250 PET | LOG300 PET | LOG320 PET | LOG400 PET | |
| A | A | A | A | A | A | ||
| Screw diameter | mm | 50 | 55 | 65 | 70 | 75 | 90 |
| Screw L/D ratio | – | 0.959028 | 0.959028 | 0.959028 | 1.000694 | 1.000694 | 1.000694 |
| Injection Volume | cm³ | 392 | 569 | 863 | 1077 | 1414 | 2290 |
| Shot weight | g | 478 | 676 | 1020 | 1274 | 1670 | 2710 |
| Max injection rate | cm³/s | 172.8 | 200 | 297 | 382 | 416 | 514 |
| Plasticizing rate | Kg/h | 152 | 183 | 227 | 241 | 312 | 425 |
| Injection pressure | mpa | 135 | 145 | 132 | 130 | 133 | 125 |
| Screw stroke | mm | 200 | 240 | 260 | 300 | 320 | 360 |
| Screw speed | rpm | 0-180 | 0-200 | 0-180 | 0-150 | 0-150 | 0-135 |
| CLAMPING | |||||||
| Clamping force | Kn | 1600 | 2100 | 2500 | 3000 | 3200 | 4000 |
| Opening stroke | Mm | 430 | 480 | 520 | 570 | 615 | 670 |
| Platen size | MmXmm | 680*680 | 745*745 | 820*790 | 870*850 | 945*945 | 1060*1040 |
| Space between tie bars | MmXmm | 460*460 | 510*510 | 560*530 | 610*590 | 660*660 | 730*710 |
| Mold thickness (Min–Max) | Mm | 180-500 | 200-550 | 200-580 | 200-600 | 250~670 | 250-730 |
| Max.daylight | Mm | 930 | 1030 | 1100 | 1170 | 1285 | 1400 |
| Ejector stroke | Mm | 140 | 150 | 150 | 160 | 160 | 185 |
| Ejector force | Kn | 50 | 67 | 67 | 77 | 77 | 111 |
| GENERAL | |||||||
| Pump motor | Kw | 15 | 18.5 | 22 | 30 | 30 | 37 |
| Heating power | Kw | 17.2 | 17.4 | 20.4 | 22.5 | 26.3 | 36.1 |
| Dry cycle time | sec | 2 | 4.5 | 4.8 | 5 | 5 | 5.1 |
| Oil tank capacity | L | 210 | 310 | 380 | 380 | 500 | 820 |
| Machine dimension | mxmxm | 5.5*1.25*2.0 | 5.7*1.32*2.1 | 6.8*1.6*2.15 | 6.8*1.5*2.18 | 7.1*1.58*2.25 | 7.9*1.75*2.41 |
| Machine weight | kg | 4720 | 6500 | 8000 | 9100 | 12500 | 14970 |